gb3920 rubbing color fastness tester/electric rubbing color fastness tester

Scope of application.


　　gb3920 rubbing color fastness meter/electric rubbing color fastness tester is used to test the dry/wet rubbing type color fastness of cotton, chemical fiber, blended and other colored fabrics and leather. The instrument is suitable for testing the color fastness of fabrics to rubbing in dry and wet states, as well as regular and periodic tests. Tester so that the specimen in a certain pressure, a certain stroke and white cotton repeatedly rubbing the specified number of times, after the white cotton and stained gray sample card to assess the level of decolorization, to improve the fabric dyeing provides the basis. Equipped with digital electronic preset counter.


　　Conforms to the following standards

　　ASTM F1319; AATCC 8 165; BS 1006 D02; GB/T 3920; ISO 105 D02 X12; JIS L0849; M&S C8/C8A; NEXT TM6

　Instrument features.

　　gb3920 rubbing color fastness tester/electric rubbing color fastness tester is used for dry and wet rubbing color fastness testing of fabrics, suitable for regular or periodic testing.

　　A. Friction head diameter is: 16mm or 25mm;

　　B Provide pressure for: 9N;

　　C, electric drive, requires a working voltage of 220V;

　　D, with an electronic counter, fully simulate the test results of manual friction ten times, the data reproducibility;

　　E, equipped with standard friction fabric fixtures;

　　F, the specimen clip spring steel made to ensure fast fastening specimens;

　　G, the equipment control mode: the internal settings of AATCC, ISO and other standards, you can also set their own procedures;

　　H, with automatic alarm function after testing.


　　Accessories and consumables.

　　1、Abrasive cloth fastening sample clip

　　2、Standard abrasive sandpaper

　　3、Abrasive cloth (AATCC/ISO standard)

　　4、Friction small white cloth (SDC)

　　5、Calibration fabric

　　6、Grey card (staining)-ISO/BS standard

　　7、Grey card (stained)--AATCC standard

crosshatch scratch tester
Multi-functional Scratch tester
Fogging tester

评论

发表评论

此博客中的热门博文

wet penetration textile test instrument

图片
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...
阅读全文

Steaming Shrinkage Cylinder

图片
Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76   Applications: Used for steaming shrinkage test of fabric, and reproducibility measurement for shrink components that is produced in the processof fabric shrinkage.   Product Information: Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with anintegral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Template is suitable for measuring relaxation shrinkage of testing fa...
阅读全文

Cone calorimetric test equipment

图片
  Standards  Application ISO 5660  Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354  Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15  Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products. GB/T 16172-2007  Method of test for heat release rate of building materials. NFPA 264  Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter   A 、 Ignition system  1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism. 2、System automatic ignition, automatic timing, automatic gas closing and fire-off. B 、 Exhaust system 1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting c...
阅读全文