Button Impact Tester

Testing Standards: ASTM D5171


Applications:
Button Impact Tester is used to determine the impact resistance of plastic sew-through flange buttons.



Product Information:
With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.

评论

发表评论

此博客中的热门博文

wet penetration textile test instrument

图片
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...
阅读全文

Steaming Shrinkage Cylinder

图片
Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76   Applications: Used for steaming shrinkage test of fabric, and reproducibility measurement for shrink components that is produced in the processof fabric shrinkage.   Product Information: Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with anintegral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Template is suitable for measuring relaxation shrinkage of testing fa...
阅读全文

Cone calorimetric test equipment

图片
  Standards  Application ISO 5660  Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354  Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15  Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products. GB/T 16172-2007  Method of test for heat release rate of building materials. NFPA 264  Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter   A 、 Ignition system  1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism. 2、System automatic ignition, automatic timing, automatic gas closing and fire-off. B 、 Exhaust system 1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting c...
阅读全文