taber abrasion resistance tester

 taber abrasion resistance tester

TABER abrasion resistance tester and wear resistance tester can be replaced by wheel and weight,

which apply to the abrasion resistance performance test on fabric, cardboard, paint, leather, tile, glass and natural rubber,

method is simple and easy to operate,which has been widely used in various industry's testing laboratory.

Abrasion tests, the material is standard wheel friction after a certain number of turns,

evaluate its abrasion resistance material weightlessness rate by calculation.

Abrasion wheel after pre grinding standard method, test results can reach very high consistency.



Core advantages

Simple operation, display real-time speed, the speed control can be achieved 30-75rpm adjustment,wearing can be preset number of turns. Arm can match with balance weights, accurate weight balance abrasion arm,to realize the ASTM standard which requires 125 g pressure requirements

Vacuuming mouth height is adjustable, and adapt to different thickness materials, efficient removal of debris, improve test accuracy.Brand motor, mute, low noise, smooth operation

taber abrasion resistance tester

Xenon lamp climate test chamber for the industry

UV aging test chamber test method


评论

发表评论

此博客中的热门博文

wet penetration textile test instrument

图片
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...
阅读全文

Steaming Shrinkage Cylinder

图片
Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76   Applications: Used for steaming shrinkage test of fabric, and reproducibility measurement for shrink components that is produced in the processof fabric shrinkage.   Product Information: Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with anintegral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Template is suitable for measuring relaxation shrinkage of testing fa...
阅读全文

Cone calorimetric test equipment

图片
  Standards  Application ISO 5660  Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354  Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15  Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products. GB/T 16172-2007  Method of test for heat release rate of building materials. NFPA 264  Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter   A 、 Ignition system  1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism. 2、System automatic ignition, automatic timing, automatic gas closing and fire-off. B 、 Exhaust system 1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting c...
阅读全文