Horizontal Vertical Combustion Tester

Horizontal and vertical combustion tester is to simulate the early situation of a fire around the electrical environment .By simulating the actual situation, the tester can assess the material fire risk, product resistance to ignition and safety characteristic of  no flame spread . Horizontal and vertical combustibility tester  can test material’s burning performance, burning rate, flame spread, combustion strength and product flame resistance properties.


Applications


Horizontal and vertical combustion tester is mainly used for measuring the burning performance of plastic, rubber or film at a predetermined fire source, to determine its fire resistance rating. It can be applied not only for the research, production and quality control departments of lighting, low-voltage electrical appliances, household appliances, electrical machine, tools, instruments as well as electrical connections and other electrical and electronic plastic or rubber products and component parts, but also for the type approval of insulation, plastic , fire blocking material or other solid combustible materials industry.

  

Features


◆ The ultra - large transparent observation window makes it easy to observe the burning state of the specimen;

◆ Humanized design of the door opening way. It is an easy way to touch the sample and burner;

◆ PLC touch screen control is easy to set parameters;

◆ Different test methods modular is easy to operate;



Standards


UL94  Test for flammability of plastic materials for parts in devices and appliances

ISO 1210 Plastics -- Determination of the burning behaviour of horizontal and vertical specimen

GB/T2408-2008/IEC60695-11-10:1999 Plastics-Determination of burning characteristics- Horizontal and vertical test

GB/T 5169.16-2008/IEC 60695-11-10 :2003/ASTM D635 Fire hazard testing for electric and electronic products. Part 16:Test flames. 50W horizontal and vertical flame test methods

GB/T 8332-2008/ISO 9772-2001/ASTM D 4986 Test method for flammability of cellular plastic-Horizonal burning method

ASTM  D4804 /ISO 9773  Standard test method for determining the flammability characteristics of non-rigid solid plastics

 

Accessories


Configuration

Base unit

F241G Calibration copper

F241G01 Cotton tray

233G02 HB Support Fixture

Optional parts

F241H Foam Support Fixture

F241G03 Support-Gauze

F241G04 Burner Wing Tip meets the requirements of ASTM D4986 standard

F241G05 Specimen Mandrel Form


Technical Parameters


ItemsParameters
Inter Size850mm×600mm×1000mm
Vent (above)Φ135mm×85mm
Burning angle45 °，90 ° （0 °） Adjustable
The specimen holder can be moved horizontally vertically
Flame time5s, 10s, 30s, 60s optional
Combustion timerTimer (accurate to 0.1s)
BurnerLength 100 ±10 mm, Inner diameter 9.5 ±mm 0.3, ASTM D 5025
Outline size 1200mm * 620mm * 1300mm
Weight90kg
Power supply220V, 50Hz

 


UV weatherproof test chamber fluorescent lamp test standards

Metal material fatigue test testing standards

Test Equipment 

评论

发表评论

此博客中的热门博文

wet penetration textile test instrument

图片
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...
阅读全文

Steaming Shrinkage Cylinder

图片
Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76   Applications: Used for steaming shrinkage test of fabric, and reproducibility measurement for shrink components that is produced in the processof fabric shrinkage.   Product Information: Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with anintegral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Template is suitable for measuring relaxation shrinkage of testing fa...
阅读全文

Cone calorimetric test equipment

图片
  Standards  Application ISO 5660  Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354  Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15  Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products. GB/T 16172-2007  Method of test for heat release rate of building materials. NFPA 264  Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter   A 、 Ignition system  1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism. 2、System automatic ignition, automatic timing, automatic gas closing and fire-off. B 、 Exhaust system 1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting c...
阅读全文