BURN-in overcurrent heat resistance testing machine

 a brief introdction


Purpose of BURN-in overcurrent heat-resistance testing machine: For a variety of electronic products to simulate working temperature and long-term operation test under normal working voltage, or to increase the voltage and temperature to conduct reliability tests on the products. This product is also called collapse, aging, heat resistance and other tests. The company can design power distribution, fixtures, trolleys, sheet metal, and add cooling systems according to customer needs.


Detailed introduction of BURN-in overcurrent and heat resistance testing machine


Purpose:


For various electronic products to simulate the working temperature and long-term operation test under normal working voltage, or to increase the voltage and temperature to conduct reliability tests on the products. This product is also called collapse, aging, heat resistance and other tests. The company can design power distribution, fixtures, trolleys, sheet metal, and add cooling systems according to customer needs.


characteristic:

1. Inner chamber material: 304# made of non-magnetic stainless steel plate.

2. Outer chamber material: SS41# medium carbon steel plate is painted with baking varnish after multiple anti-rust treatments.

3. The inner cage design can prevent thermal deformation.

4. Heat-resistant rock wool six-sided heat preservation with higher heat preservation material of outer chamber, good power saving.

5. Special control panel, double liquid crystal display temperature controller, with over-temperature thermal insulation system, multiple protection design.

6. Electronic LED display timer, full time protection.

7. Uniform distribution temperature: +-1.5%.

8. Hardware: powerful stainless steel back button.

9. Attached instruction manual, wiring diagram, guarantee, backup fuse.

10. This product is a customized product, which can be customized according to customer needs.



Suitable:


1. Electronic components: such as resistors, capacitors, inductors, chip-type products, LED light active and passive components, TFT-LCD...

2. Electronic products industry: such as motherboards, various control cards, transformers, power supplies, cooling fans, etc...

Valet design available:

1. Power-on circuit and connector installation configuration.

2. The fixture design of BURN-IN product.

3. Trolley and reel processing.

4. Test circuit, PCB design and processing 


Horizontal Vertical Combustion Tester
Glow wire tester
Needle Flame Tester

评论

发表评论

此博客中的热门博文

wet penetration textile test instrument

图片
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...
阅读全文

Steaming Shrinkage Cylinder

图片
Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76   Applications: Used for steaming shrinkage test of fabric, and reproducibility measurement for shrink components that is produced in the processof fabric shrinkage.   Product Information: Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with anintegral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Template is suitable for measuring relaxation shrinkage of testing fa...
阅读全文

Cone calorimetric test equipment

图片
  Standards  Application ISO 5660  Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354  Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15  Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products. GB/T 16172-2007  Method of test for heat release rate of building materials. NFPA 264  Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter   A 、 Ignition system  1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism. 2、System automatic ignition, automatic timing, automatic gas closing and fire-off. B 、 Exhaust system 1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting c...
阅读全文