Testing Equipment

Air filter testing equipment can be used to detect the filtration efficiency and resistance of particles such as masks and filter materials in medical device inspection center, safety protection inspection center, drug inspection center, disease prevention and control center, textile inspection center, hospital, mask research & development and manufacturer. Filter Media Test Rigs Standards: EN 143 Protection device, particle filter requirement, test, mark EN 149 Respiratory protection device, microparticle filter with half mask required test mark NIOSH 42 CFR Part 84 Respiratory protection device GB/T 2626 Self - priming filter type particulate respirator of Respiratory protective equipment GB/T 32610 Technical specification for daily protective masks Air Filter Media Test Rigs Application: G506 Mask Automatic Filter Performance Tester is used for testing professional filter material and filtration efficiencyof a wide range of air filters including HEPA and ULPA filter, respirator,...

The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...

 a brief introdction Purpose of BURN-in overcurrent heat-resistance testing machine: For a variety of electronic products to simulate working temperature and long-term operation test under normal working voltage, or to increase the voltage and temperature to conduct reliability tests on the products. This product is also called collapse, aging, heat resistance and other tests. The company can design power distribution, fixtures, trolleys, sheet metal, and add cooling systems according to customer needs. Detailed introduction of BURN-in overcurrent and heat resistance testing machine Purpose: For various electronic products to simulate the working temperature and long-term operation test under normal working voltage, or to increase the voltage and temperature to conduct reliability tests on the products. This product is also called collapse, aging, heat resistance and other tests. The company can design power distribution, fixtures, trolleys, sheet metal, and add cooling systems acc...

Burn-in cabinets and burn-in cabinets are semi-finished and finished products that use BURN-IN (pre-burning) to remove early failure and unqualified components, so that the reliability of the product is relatively improved after entering the market, and the product is indeed no problem. It is mainly suitable for related electronic communication industries such as computers, servers, MONITOR, power supplies, and electronic switches. It can be designed according to the size required by customers, and it is convenient to relocate and assemble in the future. The dedicated power supply for the test object is synchronized and connected with the machine's safety protection system. Adopting the design of HEATING BOX and explosion-proof heater, advanced servo proportional integral differential control, safe, stable and reliable. The indoor safety door can be opened to ensure the safety of personnel. Multiple over-temperature external air extraction safety protection devices and pressure exp...

Testing Standards: AATCC 162, 16 CFR Part 1610 Applications: Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water. It also can be used to prepare samples for flammability testing. Product Information: Dry cleaning and washing cylinders are also known as dry cleaning tester and AATCC 162 tester. Dry cleaning and washing cylinder is used to test the color fastness of fabric to dry-cleaning and chlorine water washing. The Dry Cleaning And Washing Cylinder is comprised of stainless steel rotating test chamber with capacity of 7650ml, support frame, variable speed drive with digital timer. Parameters: 1.Equipped with stainless steel rotating roller; 2.Height of tank: 330mm; 3.Diameter of in-tank: 220mm; 4.Rotating speed can be adjusted according to customer's requirements; 5.Overall dimension: 720×490×620mm(L×W×H); 6.Equipped with digital timer and displays; 7.Weight: 98kg. Operation Clean the dry cleaning ...

The Fabric Friction Charging Tester is composed of a friction device and a potential measuring device, which is used to test the electrostatic characteristics of the fabric after the charge is charged under laboratory conditions. Standards compliant:FZ / T01060 GB / T The main purpose: The measuring device consists of a friction device and a potential measuring device, which is used to test the electrostatic characteristics of the fabric after charging. The main parameters: 1, the measurement range: 0 ~ 2uC 2, precision: 0.001uC 3, the input impedance:> 10Ω 4, roller friction machine: diameter ≥ 590mm; depth ≥ 360mm 5, static tube: diameter: 500mm; depth: 1350mm 6, Dimensions: 1200 × 600 × 1400mm 7, power: AC220V 50HZ 1.5KW 8, weight: 65Kg Fabric Friction Charging Tester main features: 1. The measuring device is composed of a friction device and a potential measuring device; 2, the potential measurement device consists of Faraday tube and electrostatic potentiometer co...

The static attenuation performance tester can be used in the laboratory to analyze the electrostatic characteristics of the material itself, evaluate the efficacy of antistatic additive, and develop new electrostatic protective materials. It can also be used as product quality control equipment in the manufacturing area. It can conduct electrostatic detection and monitoring according to various standard specifications. The apparatus is composed of corona discharge device and probe detector. The instrument uses a given high voltage electric field to discharge the time of the fabric and make the fabric feel static. In this way, the electrostatic charge size, the half-life of static voltage attenuation, and static residue test are used to show the electrostatic properties of the measured fabric. The electric tester is the main instrument to detect the charge performance of the fabric. It is used to test the electric charge of anti-static work clothes by using the Faraday tube...

 Fabric Moisture Permeability Tester Fabric Moisture Permeability Tester Description: To determine water-vapour transmission of fabric. Used for testing the moisture permeability of all kinds of fabrics, including moisture-permeable coated fabrics and nonwoven fabrics. Without dry oven. Application scope: Used for moisture permeability test of various fabrics, film materials and coated fabrics. Standards: ASTM E90-00 ASTM E96  JIS L1099A  BS 7209  JIS L1099B Textile Fabric Moisture Permeability Tester Technical parameters: 1.Working pattern :computer control, LCD English menu operation, testing environment monitoring 2.Testing box temp. Control range: room-temperature:~45°C;distinguishability:0.1°C 3.Testing box temp. Control accuracy:±0.5°C 4.Testing box humidity control: 40%RH~95%RH±2%RH 5.Testing box humidification:≥300ml/h Fabric moisture permeability tester Electrostatic attenuation tester Fogging tester

 Textiles Airflow Resistance Tester The textile airflow resistance tester is used to determine the anti-penetration properties of ordinary fabrics and medical protective masks to airflow at a constant flow rate . It is mainly used for the determination of air penetration of textiles ,cotton, and space cotton. The tester is one of the important means to identify the comfort and hygiene of clothing textiles, especially medical textiles.   Standards  BS En 14683-2005  Surgical masks - Requirements and test methods  GB 19083-2010 Technical requirements of surgical masks GB2626-2006  Respiratory protective products-Self-priming filtering particulate respirator overview YY 0469-2011 Surgical masks YYT 0969-2013  Disposable surgical masks   Features  The instrument consists of a air source that can regulate the flow rate, a sample holding device, and an air pressure measurement system. Sample chuck made of stainless steel with built-in rubber washer...

 Dry fallen wadding tester G275 G275 Dry fallen wadding tester, The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly applicable to the evaluation of the shedding performance of raw material non-woven fabrics and other textile materials used for medical protection (surgical orders, surgical gowns, clean clothes, etc.)   1. Test philosophy: The sample is subjected to the combined action of torsion and compression in the test chamber. Air is drawn from the test chamber during this twisting process, and the test result is evaluated by counting and classfying the particles in the air with a laser dust particle counter. 2. This instrument has high-resolution large-size color touch screen and it is easy to oerate and convenient to use. At the same time, it can simultaneously monitor the number of particles in 8 particle size channels and their changes, and store up to 10X500 groups of data. It is typically used in particulate...

 Mask Bacterial Filtration Efficiency Tester Face Masks bacterial filtration efficiency BFE tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to downstream residual concentration of the tested medical face mask materials. The tester provides certain flow rate of bacterial aerosol. The operator can measure the number of colony forming units passing through the medical face mask material, which is clamped between a six-stage Anderson cascade impactor and an aerosol chamber, expressed as a percentage of the number of colony forming units present in the challenge aerosol.   Standards of Masks Bacterial Filtration Efficiency Tester: YY 0469 Technical requirements for surgical mask BS EN 14683 Medical face masks - Requirements and test methods ASTM F2100 Standard Specification for Performance of Materials Used in Medical Face Masks ASTM F2101 Standard Test Method for Evaluating the...

 Fogging Tester The fogging tester  is designed to test the fogging phenomena of leather and fabric under specified environment conditions, suitable for the fogging property evaluation of  volatile components of the  interior trimming materials used in cars and aircrafts under high temperature, and the instrument can also be used to test the fogging property of  car xenon lamps.  Working Principle: The main frame of the tester includes a water sink fully filled with specified ethylene glycol, which can reach a high temperature. At the time of testing, leather specimens are put in the six standard glass containers filled with  high temperature liquid, and the stainless steel containers are placed above each glass. Relying on the constant water flow distribution, the temperature can maintain at 20℃ constantly, and it can be adjusted through the regulation device connected to the main frame. This controlled environment condition will generate a layer of “...

 Multi-Functional Scratch Tester scratches, plastic scraper three kinds of automotive industry common test methods into one. Multi-Functional Scratch Tester is suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, coating materials, non-coated materials and other composite materials, paints, inks, soft metals and other scratch resistance testing, Decorative products, plastics, rubber, leather and other fields of surface properties of a comprehensive test equipment.   Applications Multi-Functional Scratch Tester is suitable for testing automotive interior materials, plastic, rubber, leather, coated fabric, coating materials, composite materials, paint, ink, soft metal and other industries, and widely used in product quality control, new product development performance verification, detection mechanism test and other fields.   Standards  PV 3952 Plastic interior parts scratch resistance test Ford BN 108-03,13 Scratch resista...

 Crosshatch scratch tester Crosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the evaluation of the sensory level of scratches, changes in color difference between scratched area and unscratched area, or the detaching situation of  scratched material surface coating after adhesive tape treatment. It is a commonly used instrument to determine the scratch resistance for material surface and coating.   Application The instrument is suitable to test automotive interior materials, plastics, rubber, leather, coated fabrics, coated materials, compound material, paint, ink, soft metal, etc. It is widely used in the area of product quality control, newly developed product performance verification, inspection agency test, etc.   Standards PV 3952 Plastic Interior Components. Testing of Scratch Resistance Ford BN 108-03，13  Ford Laboratory Test Method - Resistance To Scratching BMW 0180 ，PA-P 028 T...

TABER 551 hear Scratch Tester from Qinsunlab can be used to characterize film-substrate systems and to quantify parameters such as adhesive strength and friction force and using a variety of complementary methods. This makes them invaluable tools for determining coating adhesion, scratch resistance and mar resistance in research, development and quality control. Erichsen scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method). This adjustment allows the scale beam to be maintained in a level position in respect to the specimen and turntable. Designed with an integrated bearing, the scale beam can be tilted in a rest position enabling the operator to mount or remove specimens. Scratch tester Standards: GB/T 2918，GB/T 6151，GB/T 8424.3，PV3952，BMW GS97034-2，BMW GS97034-9，GMN 3943-2003，FLTM BN 108-13，S...

 Reciprocating wear tester Reciprocating abrasion tester consists of a rotary platform to place test specimen, a pair of articulated arms with friction wheel, a motor used to drive the turntable rotation, a counter used to set the rotation number of turntable with the automatic stop function, and a suction device used to take away the debris.By cahaIt’s suitable for a variety of materials’ test, such as papers, textiles, rubbers, coatings and many other tests due to the replacement of different wear wheels. Instrument principle: The tested product is fixed on a horizontal table and is worn under the specified abrasive and load with the horizontal movement of the aquarium. Using the principle of the lever, the other end of the test arm fits the weight to maintain the balance of the test arm to ensure the accuracy of the sample surface load and the reliability of the test results. Abrasive and load rack height is adjustable to suit the test of different height samples.In addition, ac...

 Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 <Abrasion test methods for textile fabrics, rotary abrasion test>, GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908   Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary abrasion test.   Product Information: For fabric, wear resistance is a important indicator to evaluate  its performance and durability properties. In the process, an abrasion material maintains line contact with the test specimen which has been clamped onto a rotating test head, and producing an abrasion effect in a tangential direction. The Schopper Abrasion Tester can be used to determine the appearance changes of samples after the friction or wear test, that is the recommended test method for DIN 53863.2, GME Standard 60345, GMW Standard 3283, VW/Audi Zentral - Norm PV 3908 Standard.   Product structure: The...

 Hydrostatic Head Tester Testing Standards: GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN 20811/3321/3424, AFNOR G07-057, ISO 811, JIS L1092A, JIS L1092.B-a, JIS L1092 B-b, ASTM F903C, ASTM F1670, ASTM F1671, EN 1734, ISO 1420, FZ/T 01004 Applications: Hydrostatic Head Tester is designed to determine the waterproof property of outdoor wears, umbrella, and waterproof fabric. It is also used to test the resistance of permeability of synthetic blood for materials used in protective clothing. Dynamic, static, custom mode for different test requirements. One side of the specimen is subjected to a hydrostatic pressure that increasing at a constant rate, then will be ended until three points of leakage appear on its other side. The instrument contains a high precision pressure control system, which could produce the test pressure in an internal water tank. Real-time pressure curve displays on the screen. Easy to use of build-in test mode for different standards. Product Information of Hydr...

Introduction  Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Comprises a draft free stainless steel cabinet with observation window and back wall painted black for easy test viewing. The different specimen holders and associated hardware is dependent on the test standards. Automatic Gas Control System could easily control the combustion process.   Application  This tester is used to detect children's pajamas or decorative fabrics, combustion performance of foam, also it’s suitable for the determination of aviation and transport materials, burning resistance of the tents and protective clothing.   Standards  ASTM D 6413-99 (formerly FTMS 191-5903), DOC-FF 3/71, CALIF TB-117, 16CRF 1615/1616, GB/T545, NFPA 701, CPAI 84, CAN/ULC S109, UL 214, CA TB 117 A1&B, CA 19 16, CFA 1615&1616, Airbus AITM 2.002, Federal Test Me...

Application:  Fabric spray rating tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the penetration of water through fabric.   STANDARDS ISO 4920 AATCC 22 JIS L1092 Note: this Fabric spray rating tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.   Features: 1、Main parts made by stainless steel, durable in use; 2、Special designed specimen holder; 3、Easy operation.   parameter: Glass funnel:?150mm×150mm Specimen gradient:45° Distance between nozzle and center of specimen:150mm Diameter of specimen holder:?155mm Package dimensions:400×380×560mm (L×M×H) Net/Gross weight:8/14kg What is a Horizontal Vertical Combustion Tester Desktop xenon lamp aging tester use precautions Test Equipment 

Martindale Abrasion And Pilling Tester Martindale Abrasion & Pilling Tester. To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters. The unique design of our Martindale abrasion tester allows removal of individual sample holders for examination without lifting the top motion plate. It provides individual counters and parking function, interval time settable and a large touch-screen display. Standard sample holders and 9 and 12kpa Weights are included. The Martindale abrasion tester is available with 4, 6, 8 or 9 test positions. Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark TM 112/19...

Air Permeability Tester of textile fabrics complies with ASTM D737, ISO 9237/7231, BS 5636, etc. It is used to test the resistance of the flow of air through fabrics. There is different air permeability test method to do air permeability testing for textiles, we can offer all the test methods and competitive price. Testing Standards: BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251, EDANA 140.1, ASTM D737, AFNOR G07-111, ISO 7231 Applications: The Air Permeability Tester accurately and swiftly determines the resistance of fabrics (woven, knitted and nonwoven textile) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area. The air permeability of the fabric is calculated automatically within a short time. Air Permeability Tester Technical Parameters: 1.Test head: 5cm2, 20cm2, 25cm2, 38cm2, 50cm2, 100cm2; 2.Test mode: Automatic; 3.Pressure range: 10-3000Pa;...

 Perspiration Tester Testing Standards: ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714 Applications: The Perspiration Tester is designed for color fastness test of various kinds of textile materials and textiles to perspiration, sea water, saliva, distilled water,etc. Product Information: The Perspiration Tester is widely used in determining the color fastness of textiles to perspiration, sea water, saliva and distilled water. The colored textile specimen combined together with the prescribed  lining fabric is wet out in a simulated acid perspiration solution or others.After the wetting processed, the specimen combination is extruded to remove the excess fluid and sandwiched between the sample board, applied with specified pressure for a certain period of time. Then dry the specimen and the lining fabric seperately and observe the color change. The stainless steel frame can hold 20 samples hel...

 Rubbing colour fastness tester Friction color fastness test instruments is designed with a base, rubbing rotation mechanism and a counter. Fix the specimen and sand paper with the specimen clamp on one side of the base. Rotate the knob to rub the friction head with the white cotton cloth against the specimen in reciprocation motion with specified strokes. After ten times of friction between the white cloth and the specimen, assess the color transfer to the white cloth with a gray scale and the stability of dyed fabric specimen or surface coating so as to provide reference data for material assessing and selection. Rubbing fastness tester is used to determine the colour fastness of cotton, chemical fiber, blended, other coloured fabrics and leather to dry or wet rubbing, suitable for frequent use and long run tests. A piece of dyed test cloth and a piece of white cotton cloth are rubbed against each other though the tester in a specific pressure and stroke. Product Information and ...