Mercury Lamp Solar Aging Tester

Description:

It is used in various types of textiles to accelerate the aging of mercury lamps under simulated sunlight.

Standard model fitted with 500 watt mercury blended tungsten lamp, pre-settable timer and time elapsed counter. Can be fitted with type C & D sample holders within which humidity can be controlled using saturated salts. Rapid Light Fastness Tester.

Rapid fade model fitted with 400 watt mercury tungsten high power lamp with transformer, pre-settable timer and time elapsed counter. Can be fitted with type D sample holders.

 

Characteristics:

1. LCD touch screen display

2. Adopting the German Osram mercury lamp

 

Standards:

BS 1006 UK/TN

 

Technical Parameters:


Mercury Lamp Solar Aging Tester



Description:

It is used in various types of textiles to accelerate the aging of mercury lamps under simulated sunlight.

Standard model fitted with 500 watt mercury blended tungsten lamp, pre-settable timer and time elapsed counter. Can be fitted with type C & D sample holders within which humidity can be controlled using saturated salts. Rapid Light Fastness Tester.

Rapid fade model fitted with 400 watt mercury tungsten high power lamp with transformer, pre-settable timer and time elapsed counter. Can be fitted with type D sample holders.

 

Characteristics:

1. LCD touch screen display

2. Adopting the German Osram mercury lamp

 

Standards:

BS 1006 UK/TN

 

Technical Parameters:

ItemsParameters
Light sourceMBTL (mercury tungsten lamp) 500W
Lamp life5000h
Indoor temperature roomroom temperature to 50 degrees
Temperature controlby water cycling in the sample holder and indoor
Internal humidity50 - 60% RH
Sample clipstainless steel
Sample size100 x 50 mm
Water tankstainless steel
The circulating water pumpseparated from the main components
Exposure area1800cm2
The distance between lamp and sample200 ± 5cm
Power supply230 V, single phase AC 50 Hz
Energy consumption0.75 kilowatt hours
Instrument size500 * 550 * 700 mm


评论

发表评论

此博客中的热门博文

wet penetration textile test instrument

图片
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical friction). Applicable Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part 6:Test method to determine the resistance to wet bacterial penetration Specifications: Rotary speed: (60 ± 1)rpm The test refers to the pressure on the material: (3±0.02)N Outward wheel speed: 5~6 rpm Timer set range: 0~99.99min The inner and outer ring weights: (800±1)g   Product accessories: RULLA 2 frame RULLA 2 support cylinder (90 mm in diameter, 40 mm high) RULLA 2 wet resistance tester (including: 1x HDPE safety strip, 1x PU / PE strip) RULLA 2 Reference (10 / pk) According to EN ISO 22610: 135 g / m2 Polyester cloth accordin...
阅读全文

Steaming Shrinkage Cylinder

图片
Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76   Applications: Used for steaming shrinkage test of fabric, and reproducibility measurement for shrink components that is produced in the processof fabric shrinkage.   Product Information: Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with anintegral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Template is suitable for measuring relaxation shrinkage of testing fa...
阅读全文

Cone calorimetric test equipment

图片
  Standards  Application ISO 5660  Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354  Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15  Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products. GB/T 16172-2007  Method of test for heat release rate of building materials. NFPA 264  Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter   A 、 Ignition system  1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism. 2、System automatic ignition, automatic timing, automatic gas closing and fire-off. B 、 Exhaust system 1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting c...
阅读全文